PCE Instruments PCE-DPD-F2 Handleiding

PCE Instruments Meetapparatuur PCE-DPD-F2

Lees hieronder de 📖 handleiding in het Nederlandse voor PCE Instruments PCE-DPD-F2 (32 pagina's) in de categorie Meetapparatuur. Deze handleiding was nuttig voor 14 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/32

PCE-DPD-F1

PCE-DPD-F2

Panel meter for load cells

Digital panel meter for load cells. Provides excitaon voltage to power up to 8 cells. Standard

96 x 48 mm size (1/8 DIN). Reading with 6 digit display. Accepts 4 and 6 wire load cells, includes ‘sense’

funcon, fast access to alarm setpoints, tare and ‘auto-tare’ funcons, ‘on power up’ funcons, stabil-

ity alarms, congurable operator menu, congurable led brightness. Universal AC and DC power. Up

to 3 oponal modules for output and control (relays, transistor, control SSR, analog outputs, Modbus

RTU communicaons, RS-485 ASCII, RS-232, ...)

www.pce-instruments.com

DIGITAL PANEL METERS

4784r03

User’s Manual

1. Panel meter PCE-DPD-F1 & F2

Panel meter for load cells, size 96 x 48 mm (1/8 DIN)

Digital panel meter, with 96 x 48 mm (1/8 DIN) size and 6

digits with 14 mm digit height, for load cell signals. Pro-

vides excitaon voltage congurable to +5 Vdc or +10 Vdc

to power up to 8 standard 350 Ohms cells. Scalable read-

ing from 999999 to -199999 with congurable decimal

point.

Tare funcon, with congurable controls, and ‘auto-tare’

funcon for automac tare correcon when weight is re-

moved from the cell. Three working modes with dierent

acquision speeds and noise rejecon to 50 and 60 Hz.

Output and control opons with 1, 2 and 3 relays, isolated

analog outputs, Modbus RTU communicaons, transistor

outputs, SSR control outputs, RS-485 ASCII and RS-232.

Independent alarms congurable as maximum or mini-

mum, with acvaon at setpoint or when reading is

stable, with 1 or 2 setpoints per alarm, hysteresis, inde-

pendent acvaon and deacvaon delays, congurable

inverted acvaon of the relay and congurable locked

alarms (see secon 1.13.8).

Front protecon IP65. Connecons by plug-in screw ter-

minals. For industrial applicaons.

Funcons included :

•

tare accessible from frontal key or rear contact

(see sec-

on 1.11)

• automac ‘auto-tare’ funcon (see secon 1.13.4)

• access to gross weight value and tare value (see sec-

on 1.9.5)

• funcon ‘On Power Up’ for automac acvaon of

funcons at start-up (see secon 1.13.14)

• scale factor for easy modicaon of reading units (see

secon 1.13.5)

• ‘stock units’ funcon to count units (see secon 1.13.6)

• access to the measured signal value (in mV), excitaon

current provided (in mA) and real excitaon voltage (see

secon 1.13.13)

• congurable ‘Fast access’ menu (key ‘UP’ ( )) with 5

access to selected funcons (see secon 1.13.13)

Mulple display lters, memory for maximum and mini-

mum, password, 5 congurable brightness levels.

1. Power and signal connecons

- connect the power (see secon 1.8)

- connect the signal (see secon 1.8)

- read recommendaons to connect the ‘sense’ (see secon

1.8.1) and for load cell ground connecons (see secon

1.8.2)

2. Inial setup (see secon 1.13.2)

- theorecal conguraon of the cell (obtain the load cell

data : sensivity, load and excitaon) and congure the

instrument

- apply the empirical conguraon of the cell (apply the

high and low ‘eld correcon’)

- assign the ‘system zero’

3. Advanced conguraon (oponal) (see secon 1.13.7)

- tare conguraon, see secons 1.11 and 1.13.4

1.1 How to use this manual

- funcon ‘stock units’ (see secon 1.13.6)

- scale factor (see secon 1.13.5)

- acquision modes (see secon 1.9.1)

4. Congure the alarms (oponal) (see secon 1.13.8)

5. Display lters (oponal) (see secon 1.13.10)

6. Congure operator controls (oponal)

- congure the rear control (see secon 1.13.11)

- congure the front key ‘LE’ (3)(see secon 1.13.12)

- congure the fast access (key ‘UP’ ( ))

5(see secon 1.13.13)

7. Congure other funcons (oponal)

- congure the ‘on power up’ funcon (see secon 1.13.14)

- congure the password and brightness level (see secon 1.13.17)

8. Congure the output and control opons: analog or serial

(see secon 1.13.18)

If this is the rst me you are conguring this instrument,

below are the steps to follow to install and congure the in -

strument. Read all the manual secons in order to have a

full and clear view of the characteriscs of the instrument.

Do not forget to read the installaon precauons

at secon

1.19

PCE Instruments | www.pce-instruments.com

1. Panel meter PCE-DPD-F1 & F2 2. . . . . . . . . . .

1.1 How to use this manual . . . . . . . . . . . . 2

1.2 Index . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 How to order . . . . . . . . . . . . . . . . . . 3

1.4 Material included . . . . . . . . . . . . . . . . 4

1.5 Addional informaon . . . . . . . . . . . . . 4

1.6 Front view . . . . . . . . . . . . . . . . . . . . 4

1.7 Rear view . . . . . . . . . . . . . . . . . . . . 4

1.8 Signal and power connecons . . . . . . . . . 5

1.8.1 Connecng the ‘sense’ . . . . . . . . . . . 5

1.8.2 Connecng the cell to the ground . . . . . 5

1.9 Technical specicaons. . . . . . . . . . . . . 6

1.9.1 Acquision modes. . . . . . . . . . . . . . 6

1.9.2 Signal ranges . . . . . . . . . . . . . . . . . 7

1.9.3 Number and type of cells accepted . . . . 7

1.9.4 Mechanical dimensions (mm ) . . . . . (in) 7

1.9.5 Gross weight, net and tare . . . . . . . . . 7

1.10 Included funcons. . . . . . . . . . . . . . . 8

1.11 ‘Tare’ funcons included . . . . . . . . . . . 8

1.12 Examples of connecons for more than 1 cell 9

1.12.1 Connecons with a juncon box . . . . . 9

1.12.2 Connecons with 3 or 4 load cells . . . . 9

1.13 Conguraon . . . . . . . . . . . . . . . . .10

1.13.1 How to operate the menus . . . . . . . .10

1.13.2 Inial set-up . . . . . . . . . . . . . . . .11

1.13.3 Inial setup menu . . . . . . . . . . . . .12

1.13.4 Funcon ‘auto-tare’ . . . . . . . . . . . .13

1.13.5 Scale factor . . . . . . . . . . . . . . . . .13

1.13.6 Funcon ‘stock’. . . . . . . . . . . . . . .13

1.2 Index

1.13.7 Advanced conguraon menu . . . . . .14

1.13.8 Alarms. . . . . . . . . . . . . . . . . . . .15

1.13.9 Alarm conguraon . . . . . . . . . . . .16

1.13.10 Display lters . . . . . . . . . . . . . . .17

1.13.11 Rear controls . . . . . . . . . . . . . . .18

1.13.12 Front key ‘LE’ ( ). . . . . . . . . . . . .

318

1.13.13 Fast access. . . . . . . . . . . . . . . . .19

1.13.14 ‘On power up’ funcon. . . . . . . . . .19

1.13.15 ‘Fast access’ conguraon menu . . . .20

1.13.16 ‘On power up’ conguraon. . . . . . .20

1.13.17 Tools . . . . . . . . . . . . . . . . . . . .21

1.13.18 Access to opons conguraons menu 21

1.14 Full conguraon menu. . . . . . . . . . . .22

1.15 Factory conguraon . . . . . . . . . . . . .25

1.16 Messages and errors . . . . . . . . . . . . .25

1.17 To access the instrument . . . . . . . . . . .26

1.18 Modular architecture . . . . . . . . . . . . .26

1.19 Precauons on installaon . . . . . . . . . .27

1.20 Warranty . . . . . . . . . . . . . . . . . . . .27

1.21 CE declaraon of conformity . . . . . . . . .27

2. Output and control modules . . . . . . . . . . .28

2.1 Module PCE-DPD/R . . . . . . . . . . . . . . .28

2.2 Module PCE-DPD/T . . . . . . . . . . . . . . .28

2.3 Module PCE-DPD/SSR. . . . . . . . . . . . . .29

2.4 Module PCE-DPD/AV . . . . . . . . . . . . . .29

2.5 Module PCE-DPD/MB. . . . . . . . . . . . . .30

2.6 Module PCE-DPD/485 . . . . . . . . . . . . .30

2.7 Module PCE-DPD/232 . . . . . . . . . . . . .31

PCE-DPD F

Model Power

-1+Up to 3 slots for opons available

-1 (85-265 Vac/dc)

-2 (11/60 Vdc,

24 Vac, 48 Vac)

1.3 How to order

Opons

PCE-DPD/R (1 relay SPDT)

PCE-DPD/AV (analog output mA & Vdc)

PCE-DPD/MB (Modbus RTU)

PCE-DPD/485 (RS-485)

PCE-DPD/233 (RS-232)

PCE-DPD/T (1 transistor)

PCE-DPD/SSR (1 SSR control)

Product specificaties

Merk:	PCE Instruments
Categorie:	Meetapparatuur
Model:	PCE-DPD-F2

Heb je hulp nodig?

Als je hulp nodig hebt met PCE Instruments PCE-DPD-F2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Meetapparatuur PCE Instruments

PCE Instruments PCE-RCM 16 Handleiding

17 November 2024

PCE Instruments PCE-EVSE 300 Handleiding

17 November 2024

PCE Instruments PCE-SFS 10 Handleiding

17 November 2024

PCE Instruments PCE-HLD 10 Handleiding

17 November 2024

PCE Instruments PCE-VE 270HR Handleiding

17 November 2024

PCE Instruments PCE-COM 20 Handleiding

17 November 2024

PCE Instruments PCE-RT 1200 Handleiding

17 November 2024

PCE Instruments PCE-PMI 1BT Handleiding

17 November 2024

PCE Instruments PCE-AC 2000 Handleiding

17 November 2024

PCE Instruments PCE-MIR 10 Handleiding

22 Oktober 2024

Handleiding Meetapparatuur

Nieuwste handleidingen voor Meetapparatuur

Festo NEDY Handleiding

21 November 2024

Festo DFPD-10 Handleiding

21 November 2024

Dostmann Electronic RLD 380 Handleiding

20 November 2024

Milwaukee 2225-20 Handleiding

19 November 2024

Kübler Codix 542 Handleiding

19 November 2024

HT Instruments FULLTEST3 Handleiding

19 November 2024

Joy-it VM-433 Handleiding

18 November 2024

Joy-it VAM-10010 Handleiding

18 November 2024

Rotronic CP11 Handleiding

18 November 2024

Techno Line MA 10230 Handleiding

18 November 2024