One For All Evolve 2 Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor One For All Evolve 2 (2 pagina's) in de categorie Afstandsbediening. Deze handleiding was nuttig voor 6 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
B SET UP BY CODE
HOW TO SET UP YOUR REMOTE
If your brand is not listed in section A, you can set up your device by trying codes individually.
To do this:
1. Turn your device on (not on standby).
2. Locate the brand of your device in the code list (pages 126-137). Codes
are listed by Device Type and Brand.
3. Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
4. Press the MODE key repeatedly until the LED for the device you want to
set up is lit.
5. Enter the rst 4 digit code listed for your brand (e.g. 4542 for a Aiwa TV).
6. The LED will blink twice and go out.
7. Now aim the remote towards your device and press the POWER key.
8. If the device turns o, your remote is ready to use. If not, repeat steps 3-7 with the next code
in the list.
Some codes are quite similar. If you nd that one or more keys do not operate as you expect,
try again from step 3 with the next code in the list.
ESPAÑOL
URC7125
SIMPLE SET UP GUIDE
ENGLISH
Open the battery door.
Insert 2 AAA batteries.
ENGLISH
KEY TABLE
HOW TO SET UP YOUR REMOTE
A – SIMPLESET
SimpleSet is a quick and easy way of setting up the remote to control the most popular brands of
each device type with only a few key presses, typically in under a minute per device. The rst step
is to select which device you are going to set up. The following is a list of Device Modes on the
remote control, and the Device types that can be set up on that mode:
Device Mode Type of device
TV TV, HDTV, LED, LCD, Plasma, Projector
STB Set Top Box, Satellite Receiver, Cable Converter,
Freeview, DVB-T, IPTV, Media, Streamer
For each Device type, there is a list of the top brands, each with a number assigned to it,
for example 6 for a Samsung TV. Locate your device and brand in the list that follows:
TV
1Bush
2Grundig
3LG
4Panasonic
5Philips
6Samsung
7Sharp
8Sony
9TCL / Thomson
0Toshiba
STB: Sat, Cable, DVB-T
1BSkyB / Sky Ireland / Orange
2Canal+ / CanalSat / Telefonica /
Movistar / KPN
3TechniSat
4DStv / Multichoice / Foxtel / Sky New
Zealand
5freebox / Vu+ / Deutsche Telekom /
T-Home
6Humax / Tricolor TV
7Vodafone / Kabel Deutschland
8Sky Italia / SFR / Neuf TV
9Sky Deutschland / Österreich
0UPC / Cablecom / Ziggo / Virgin Media /
Telenet
MAGIC: Used to set up
your remote
+/-: Channel Up and Down
MENU: Show the menu of
the current device
EXIT: Exit from the Menu of
the current device
AV: Select the input on
the current device
INFO: Displays info of
current playback
POWER:
Power on/o
PP: Previous Program, Last
Channel
NETTV: NETTV, Netix
Red, Green, Yellow, Blue –
Fastext/Quick access keys
PLAYBACK: Playback keys
for the current device
MODE: Scroll through
the devices your remote is
set up to control
WATCH TV: Combines TV and
STB into one mode
for TV viewing
FAV: Favourite Channels
GUIDE: TV Guide, EPG
SMART: Access internet
and Smart features
of your TV or internet-
connected device
BACK: Back one step in
the Menu of the current device
VOL: Volume Up, Down and
Mute
HOME: Displays the Home
Menu
LIST: Displays a list of
recorded programmes
A – SIMPLESET
HOW TO SET UP YOUR REMOTE
To set up your device
1. Turn on your device (not on standby) and point the OFA remote towards it.
2. Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
3. Press the MODE key repeatedly until the LED for the device you want to
set up is lit.
4. Hold down the digit for your brand and device as listed above (e.g. 6 for
Samsung TV).
5. The remote will send Power every 3 seconds until your device switches o.
6. As soon as your device switches o, release the digit.
7. The LED will blink twice and go out. The remote should now operate your device.
If you nd one or more keys do not work as you expect, start again at step 1 – the remote will
start with the next code in the memory.
Evolve_2_QSG_UK_URC7125_711733_RDN1010519.qxp_Opmaak 1 01-05-19 17:11 Pagina 1
LEARNING
Your One For All remote control can learn any function from any other working remote control.
This can be useful if you are missing one or more functions from your original remote control and
would like to add them to the ONE FOR ALL. You can learn onto any key except MAGIC or MODE.
You can also learn a complete device if you can’t nd a code.
To learn, rstly make sure you have all your original remote controls to hand, and that they have
working batteries in. To learn functions, the original remote should be approximately 3cm from
the OFA remote, pointing towards it as shown below:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current device will stay lit.
2. Press the MODE key repeatedly until the LED for the device you want to
learn functions on is lit.
3. Press 975 – the LED will blink twice.
4. Press and release the key you want to learn a function onto (for example
the HOME key) – The red LED will blink continuously.
5. Press and release the key on the original remote.
6. The LED will blink twice to indicate the key has been learned correctly.
7. Repeat steps 4 and 5 for each key you want to learn – remember you can learn from multiple
remotes, but only one function per key.
8. When you learned all the functions you require, press and hold the
MAGIC key until the LED blinks twice and turns o.
HINTS
If the LEDs shows one long blink at step 6, the function was not learned correctly, please try
again from step 4.
If you nd one or more keys don’t work properly after set up, you can re-enter the learning
mode at any time by repeating the procedure from step 1.
TO DELETE A LEARNED FUNCTION, THE PROCEDURE IS:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current device will stay lit.
2. Using the MODE key, make sure the LED for the device you want to delete functions
from is lit.
3. Press 976 – the LED will blink twice
4. Press the key to delete twice – the LED will blink twice.
Repeat the above procedure for each key you want to delete.
ACTIVITIES
The Watch TV feature combines TV and STB into a single mode. In this mode the Volume and AV
keys will control the TV, and the rest of the keys will control the STB.
As the AV key is intended to select the input on your TV and most TVs use a menu to select from a
list of inputs, when the AV key is pressed in Watch TV Mode, the Menu Up, Down, Left, Right and
OK keys temporarily control the TV. If the OK key is pressed, or no key is pressed for ten seconds,
these keys will revert to controlling the STB.
If you hold down the Power key for 2 seconds in Watch TV Mode, the remote will send the Power
function for TV and STB.
MACROS
PROGRAM A MACRO
You can program any key on your OFA remote (except MAGIC or MODE) to send multiple
commands on a single press –a Macro. This can be useful for controlling multiple devices to put
them in a certain state – for instance you could put your TV on HDMI 1 and press Power on the
Set Top Box to start watching TV.
To program a macro, the procedure is as follows:
1. Hold down MAGIC until the LED under the device blinks twice.
The LED under the current device will stay lit.
2. Press 995 – the LED will blink twice.
3. Next select the key you want to program the Macro on.
4. Now use the MODE key to select the device you want the rst function
of the Macro to come from, for example TV.
5. Next, press the key you want to include in the Macro, for example the
AV key.
6. Repeat steps 4 (if necessary) and 5 to add more keys to the Macro. You can include up to 15
key presses .
7. To store the Macro, hold down the MAGIC key until the LED blinks twice.
If the LED shows a long blink when you press a key in steps 4 or 5, you have entered too
many keys, please try again.
DELETING A MACRO
If you want to remove a macro from a key, please perform the following:
1. Hold down MAGIC until the LED under the device blinks twice. The LED
under the current device will stay lit.
2. Press 995 – the LED will blink twice.
3. Press the key the macro is programmed on.
4. Now hold down the MAGIC key until the LED blinks twice – the Macro is
deleted.
VOLUME LOCK
If you always use one device to control volume, for example your TV, you can set up the One For
All to always control that device, regardless of which device your remote is controlling. To do this:
1. Hold down MAGIC until the LED under the device blinks twice. The LED under the current
device will stay lit.
2. Press 993 – the LED will blink twice.
3. Use the MODE key to select the Device you want to lock the Volume to.
4. Press MAGIC once – the LED will blink twice and volume is now locked.
To unlock the volume and set every device back to controlling its own volume, the procedure is:
1. Hold down MAGIC until the LED under the TV key blinks twice. The LED under the current
mode key will stay lit.
2. Press 993 – the LED will blink twice.
3. Press VOLUME UP – the LED will blink twice and Volume is now unlocked.
Universal Electronics BV
Europe & International
Colosseum 2, 7521 PT Enschede
The Netherlands
URC7125
711733
RDN-1010519
2 - 5 CM
THE NETTV FEATURE
The Evolve features a “NETTV key for viewing digital TV,
streamed over the internet. If your original remote control
already had a key for this - for example many newer TVs have
a Netix key - then this key will perform exactly the same as
the key on your original remote. However if you did not have
a key like this, but still had the ability to watch a streaming
service, you can use this key as a shortcut by programming a
macro on it. Most AV devices which are connected to the internet, such as Smart TVs or streaming
Set Top Boxes have one or more applications they can run to access TV viewing via the internet.
Examples of these would be Netix, YouTube, Amazon Prime, BBC iPlayer or similar.
To program the macro, you rst need to know the device you use to access the service, and then
the sequence of keys you need to press to always bring up the service you prefer, For example,
some Panasonic TVs will start Netix by pressing the Apps key, then Menu Down Twice, and
nally the OK key. Or on an Apple TV, the sequence is Menu, Menu Down and OK.
Once you have determined the sequence for your device, follow these steps:
1. Sit in front of your device with It switched on (not on standby)
2. Hold down the NETTV key until the LED blinks twice and stays lit
3. Use the MODE key to select the device you want to use for the NETTV macro (e.g. TV)
4. Now perform the sequence of keys exactly as would normally. The remote will operate your
device and the macro is recorded in real time - so if it normally takes a few seconds for your
device to react don’t worry.
5. One you have nished the sequence - and the Streaming Service has started on your device -
hold down the NETTV key until the LED blinks twice and goes out. The macro is now stored.
Tips
Make sure the Evolve Is operating the device in question before programming
If you nd the Macro doesn’t work as expected, you can just repeat the same sequence
to reprogram
When programming, wait for your device to respond rst, the remote will remember
the timing
The NETTV macro is tied to one device, remember to make sure you are watching
the correct device.
English - PRODUCT DISPOSAL
This product bears the selective sorting symbol for waste electrical and electronic equipment
(WEEE). This means that this product must be handled pursuant to European directive
2012/19 / EU in order to be recycled or dismantled to minimize its impact on the
environment.
User has the choice to give this product to a competent recycling organization or to the retailer
when user buys a new electrical or electronic equipment.
BATTERY DISPOSAL
(EUROPEAN DIRECTIVE 2006/66/EC)
Please do not dispose your batteries with your normal household waste but inform yourself about
the local separate collection for empty batteries to dispose them correctly. This will help preventing
potential negative eects on the environment and/or human health.
UNIVERSAL ELECTRONICS INC/ONE FOR ALL warrants to the original purchaser that this product
will be free from defects in materials and workmanship under normal and correct use for a period
of one (1) year from the date of original purchase. This product will be replaced free of charge if it
has been proven to be defective within the one (1) year warranty period. This warranty does not
cover cartons, carrying cases, batteries, broken or marred cabinets or any other item used in con-
nection with the product. Any further obligation than listed above is excluded. Please notice that
we need your purchase receipt so that we may establish your eligibility for service. If you have
bought this product for purposes which are not related to your trade, business or profession, please
remember that you may have legal rights under your national legislation governing the sale of con-
sumer goods. This guarantee does not aect those rights.
www.oneforall.com
Evolve_2_QSG_UK_URC7125_711733_RDN1010519.qxp_Opmaak 1 01-05-19 17:11 Pagina 5


Product specificaties

Merk: One For All
Categorie: Afstandsbediening
Model: Evolve 2
Kleur van het product: Zwart
Ingebouwd display: Nee
Gewicht: 94 g
Gewicht verpakking: 334 g
Afmetingen verpakking (BxDxH): 45.4 x 232 x 21 mm
Ondersteund aantal accu's/batterijen: 2
Merkcompatibiliteit: Alle merken
Maximumbereik: - m
Backlight toetsen: Nee
Oplaadbaar: Nee
Input type: Drukknopen
juiste gebruik afstandsbediening: CABLE, DTT, IPTV, SAT, TNT, TV
Type batterij: AAA
Number of devices supported: 2

Heb je hulp nodig?

Als je hulp nodig hebt met One For All Evolve 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Afstandsbediening One For All

Handleiding Afstandsbediening

Nieuwste handleidingen voor Afstandsbediening