OBSBOT Tiny 2 Handleiding

OBSBOT Niet gecategoriseerd Tiny 2

Lees hieronder de šŸ“– handleiding in het Nederlandse voor OBSBOT Tiny 2 (7 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 276 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/7
2
User Manual
English
Note
āš  Important consideration
Recommendation
We recommend that users watch tutorial videos and read the user manual ļ¬rst to
understand the usage process.
https://www.obsbot.com/download
Reading Guide
Tutorial Video
Users can access and watch tutorial videos through the following link and QR code
to learn how to use the product correctly.
https://www.obsbot.com/explore/obsbot-tiny-2
43
About Tiny 2
OBSBOT Tiny 2 is an AI-powered PTZ webcam equipped with a two-axis gimbal. It
further innovates the algorithm technology, adds a variety of intelligent shooting
modes, and is supplemented by a variety of gesture control and voice control
functions to meet usersā€™ needs from different scenarios.
OBSBOT Tiny 2 is connected to the computer via USB, plug and play. It also comes
with OBSBOT WebCam software to expand more advanced functions.
āš  Connecting Suggestions: USB 3.0 Port
If the following phenomena occur when using the OBSBOT Tiny 2 for the ļ¬rst time:
screen delay/lag/ļ¬‚ash, device automatic reset and restart, your Tiny 2 may be
connected to a USB 2.0 port. Please switch to a USB 3.0 port to ensure normal
operation.
āš  System Requirements
Windows 7, Windows 8, Windows 10 or later
macOS 10.13 or later
7th Gen IntelĀ® Coreā„¢ i5 or later
āš  Recommended for 1080p 60fps and 4K
Recommended Apple computers:
ā‘  MacBook Pro (2018, 8th Gen IntelĀ® Coreā„¢ i5 Processors or later)
ā‘” MacBook Air (2018, 8th Gen IntelĀ® Coreā„¢ i5 Processors or later)
ā‘¢ iMac Retina (2019, 8th Gen IntelĀ® Coreā„¢ i5 Processors or later)
Recommended PC conļ¬guration:
ā‘  CPU: 7th Gen IntelĀ® Coreā„¢ i5 Processors or later
ā‘” RAM: 8GB
OBSBOT Tiny 2 Overview
Placement Instructions
1. Placement on a Monitor
Please operate as shown in the following ļ¬gure:
ā‘  Open the adjustable stand and place it on the monitor.
ā‘” Put OBSBOT Tiny 2 on the adjustable stand.
ā‘¢ Adjust the camera to the best viewļ¬nder position by tilting the camera properly
as needed.
Setting Up Tiny 2
Parts Info
1. 4K Ultra HD lens
2. Camera Indicator
3. Dual Microphones
4. USB-C Port
5. UNC 1/4-20 Interface
6. Extension Port
65
2. Placement on a Desktop
Place Tiny 2 directly on your desktop.
3. Placement on a Tripod
OBSBOT Tiny 2 is equipped with a standard UNC 1/4-20 nut connector on the base
for mounting the camera to a stand/tripod.
Connect to the Computer
OBSBOT Tiny 2 is compatible with both Windows and Mac computers. To set up
your OBSBOT Tiny 2, use the standard data cable to connect it to your laptop or the
USB 3.0 port on your desktop. If necessary, use the provided USB-C to USB-A
adapter. The webcam will automatically install on your device. Please wait a few
seconds for the installation to ļ¬nish before attempting to access the webcam. After
the installation is complete, you can use popular video call platforms such as Zoom,
Microsoft Teams, Skype, or Google Meet to start streaming with your Tiny 2.
āš 
ā‘  If the product is in working condition for a long time, the bottom of the product
will heat up, which is normal situation.
ā‘” To avoid compatibility problems, be sure to use the standard data cable to
connect the computer.
ā‘¢ To prevent the product from malfunctioning due to insuī˜cient power supply,
please connect it directly to your computer or use an expansion dock with an
independent power supply. Also, ensure that the access port is USB 3.0.
ā‘£ 4K streaming requires compatible third-party software.
Gimbal
OBSBOT Tiny 2 is equipped with a 2-axis brushless motor gimbal. The controllable
rotation range for the pan is Ā±140Ā°, and for the tilt is 30Ā° to -70Ā°.
USB 3.0
Zoom to 2x (default) / Cancel
Perform the gesture control as shown in the ļ¬gure. The status
light will ļ¬‚ash twice continuously to indicate that the zoom
in/out operation has been performed.
Sleep Mode
ā‘  Manual Sleep
Please adjust the lens to point straight down. If the indicator light is off, it means that
the sleep mode is activated.
ā‘” Device Auto Sleep
You can use OBSBOT WebCam software to set the sleep time so that it automatically
enters sleep mode as needed.
Gesture Control 2.0
Turn On/Off Human Tracking
To enter human tracking mode, perform the gesture as shown
in the ļ¬gure. The current status light will ļ¬‚ash twice in
succession and then turn to a steady blue state, indicating
that you have successfully entered human tracking mode.
To exit human tracking mode, perform the same gesture
again. The blue status light will ļ¬‚ash twice continuously and
then turn to a steady green state, indicating that you have
successfully exited human tracking mode.

Product specificaties

Merk: OBSBOT
Categorie: Niet gecategoriseerd
Model: Tiny 2

Heb je hulp nodig?

Als je hulp nodig hebt met OBSBOT Tiny 2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd OBSBOT

OBSBOT

OBSBOT Me Handleiding

25 September 2024
OBSBOT

OBSBOT Tiny 2 Handleiding

26 Juli 2023
OBSBOT

OBSBOT Meet 4K Handleiding

22 Juni 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Gourmetmaxx

Gourmetmaxx 03863 Handleiding

24 December 2024
Vello

Vello PGS-P Handleiding

24 December 2024
Venom

Venom Quad Charging Station VS4796 Handleiding

24 December 2024
Nec

Nec IPJ2000CM Handleiding

24 December 2024
Monogram

Monogram ZKPN Handleiding

24 December 2024
Philips

Philips Quick Clean Pot QCP10 Handleiding

24 December 2024
Philips

Philips Senseo HD7002 Handleiding

24 December 2024
D-Link

D-Link DUB-C2 Handleiding

24 December 2024
Nec

Nec MultiPresenter Stick DS1-MP10RX1 Handleiding

24 December 2024
Nec

Nec DS1-TM01 Handleiding

24 December 2024