Nec LT260 Handleiding

Nec Beamer LT260

Lees hieronder de 📖 handleiding in het Nederlandse voor Nec LT260 (151 pagina's) in de categorie Beamer. Deze handleiding was nuttig voor 40 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/151
Portable Projector
LT260/LT240/LT220
User’s Manual
About this user's manual
The fastest way to get started is to take your time and do everything right the first time.
Take a few minutes now to review the user's manual. This may save you time later on. At
the beginning of each section of the manual you'll find an overview. If the section
doesn't apply, you can skip it.
CD-ROM version
E-2
Introduction to the Projector
INTRODUCTION
This section introduces you to your new LT260/LT240/LT220 Projector and
describes the features and controls.
Congratulations on Your Purchase of The LT260/LT240/
LT220 Projector
The LT260/LT240/LT220 is one of the very best projectors available today.
The LT260/LT240/LT220 enables you to project precise images up to 500
inches across (measured diagonally) from your PC or Macintosh com-
puter (desktop or notebook), VCR, DVD player, document camera, a laser
disc player or Viewer.
You can use the projector on a tabletop or cart, you can use the projector
to project images from behind the screen, and the projector can be per-
manently mounted on a ceiling*1. The remote control can be used wirelessly.
*1Do not attempt to mount the projector on a ceiling yourself.
The projector must be installed by qualied technicians in order to en-
sure proper operation and reduce the risk of bodily injury.
In addition, the ceiling must be strong enough to support the projector
and the installation must be in accordance with any local building codes.
Please consult your dealer for more information.
Features you'll enjoy:
The newly developed 3D Reform function allows you to correct trap-
ezoidal distortion for both horizontally and vertically so that the im-
age is square even when projector is positioned o center of the
rooms screen.
The LT260/LT240/LT220 projector provides wired and wireless net-
working. When using as a wireless LAN projector, no physical signal
cable connection to a PC is required.*2
*2A wireless LAN card is required. The NEC optional wireless LAN card is
available. (SWL-2100N-N
)
E-3
INTRODUCTION
Introduction to the Projector
Safety protect by Passcode and Security functions
Passcode and Security features prevent the projector from being used by
unauthorized individuals.
Passcode prevents unauthorized individuals from changing projector set-
tings or adjustments Security oers complete protection by using your PC
card as a protect key so that the projector will not project a signal without
insertion of the registered PC card and unauthorized use can be discour-
aged.
The built-in Viewer allows you to start your presentation even when a
PC is not available at the site.
A high-bright 220 watt DC lamp.
The Standby mode reduces standby power consumption significantly.
The supplied wireless remote control that operates the projector from
the front side or rear.
The image can be projected between 30 and 500 inches (measured
diagonally).
The "Capture" enables you to capture the current projected image.
An image can be projected from in front or behind a screen, and the
projector can even be installed on the ceiling.
NEC’s exclusive Advanced AccuBlend intelligent pixel blending tech-
nology - an extremely accurate image compression technology - of-
fers a crisp image with UXGA (1600 1200) resolution*3.
Supports most IBM VGA, SVGA, XGA , SXGA/UXGA(with Advanced
AccuBlend)*3, Macintosh, component signal (YCbCr/ YPbPr) or any
other RGB signals within a horizontal frequency range of 24 to 100
kHz and a vertical frequency range of 50 to 120 Hz. This includes
NTSC, PAL, PAL-N, PAL-M, PAL60, SECAM and NTSC4.43 stan-
dard video signals.
*3A UXGA (1600 1200) and SXGA image (1280 1024) are displayed⳯ ⳯
with NEC’s Advanced AccuBlend on LT260/LT240/LT220.
An XGA image (1024 768) is displayed with NEC’s Advanced
AccuBlend on LT220.
E-10
 : Use these buttons to change the level of a selected menu item.
A press of the button executes the selection. When the menus
or the Viewer tool bar is not displayed, these buttons can be
used to select a slide, or to move the cursor in Folder List or
Slide List.
When the pointer is displayed, these  buttons move the pointer.
10. MENU Button
Displays the menu.
11. LAMP Indicator
If this light blinks red rapidly, it's warning you that the projection lamp
has exceeded 1500 hours (up to 2000 hours in Eco mode) of service.
After this light appears, replace the lamp as soon as possible. (See
page E-118). If this is lit green continually, it indicates that the lamp
mode is set to Eco. See the Lamp Indicator section on page E-124 for
more details.
12. 3D REFORM Button
Press this button to enter 3D Reform mode to correct the keystone
(trapezoidal) distortion, and make the image square.
INTRODUCTION
Part Names of the Projector
Top Features
E-11
INTRODUCTION
Part Names of the Projector
Terminal Panel Features
10 11 3 5
421678
91213
Terminal Panel Features
1. RGB IN 1 / Component Input Connector (Mini D-Sub 15 Pin)
Connect your computer or other analog RGB equipment such as IBM
compatible or Macintosh computers. Use the supplied RGB cable to
connect to your computer. This also serves as a component input con-
nector that allows you to connect a component video output of compo-
nent equipment such as a DVD player. This connector also supports
SCART output signal. See page E-29 for more details.
2. RGB IN 2 / Component Input Connector (Mini D-Sub 15 Pin)
This connector has the same function as the RGB IN 1 connector.
NOTE: The RGB IN 2 does not support SCART output signal and Plug &
Play.
3. RGB AUDIO IN Mini Jack (Stereo Mini)
This is where you connect audio output from your computer or DVD
player. A commercially available audio cable is required.
4. RGB OUT Connector (Mini D-Sub 15 Pin)
You can use this connector to loop your computer image to an external
monitor from the RGB 1 or 2 input source.
The RGB analog signal set on RGBOUT Terminal is output during idle
mode. See pages E-32 and 100.


Product specificaties

Merk: Nec
Categorie: Beamer
Model: LT260

Heb je hulp nodig?

Als je hulp nodig hebt met Nec LT260 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Beamer Nec

Handleiding Beamer

Nieuwste handleidingen voor Beamer