Monitor Audio IV140 Handleiding

Monitor Audio Speaker IV140

Lees hieronder de 📖 handleiding in het Nederlandse voor Monitor Audio IV140 (6 pagina's) in de categorie Speaker. Deze handleiding was nuttig voor 16 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/6

INSTALLATION INSTRUCTIONS

Installation Instructions

1. If using the pre-construction bracket, place this into position now prior to plaster-boarding. The plasterer can then x the plasterboard around

the pre-construction bracket.

400mm

2. If not using the pre-construction bracket and the plaster is all ready up, the location of the studs needs to be accurately determined. Draw

around template ensuring the speaker is between the centres of the 400mm studs.

400mm

3. Cut around the marked line.

4. Test t the speaker ensuring it ts neatly in the cut out and that the screw holes line up with the studs.

Do not try to remove the printed membrane o the front of the speaker.

5. Check the depth of the speaker is correct. The front white membrane of the speaker should be ush with the plasterboard. If using 12mm

plasterboard, there should need to be any additional work to carry out but checking is advisory.

If it is lower than the plasterboard, use the supplied card shims to space it o of the studs.

If it is proud of the plasterboard then some material will need to be taken o the studs to ensure it is ush.

Product specificaties

Merk:	Monitor Audio
Categorie:	Speaker
Model:	IV140
Kleur van het product:	Black, White
Gewicht:	9000 g
Breedte:	401.5 mm
Diepte:	106 mm
Hoogte:	642 mm
Bluetooth:	Nee
Connectiviteitstechnologie:	Bedraad
Gemiddeld vermogen:	100 W
Aantal per verpakking:	1 stuk(s)
Aanbevolen gebruik:	Universeel
Impedantie:	8 Ohm
Audio-uitgangskanalen:	- kanalen
Speaker plaatsing:	Inbouw in de muur/plafond
Aantal drivers:	3
Frequentiebereik:	75 - 18000 Hz
Gevoeligheid:	82 dB
Versterker:	Nee
Aanbevolen versterkingskracht (max):	100 W
aanbevolen versterkingskracht (min):	20 W