Luxli ORC-TIMP-3C Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor Luxli ORC-TIMP-3C (2 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 4 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Thank you for choosing Luxli.
Precautions
Assembling the Case
The Luxli ORC-TIMP-3C case is designed to carry three Luxli Timpani lights
along with accessories such as cables and power adapters. It will also
accommodate most 1×1 lights. Its lightweight yet rugged construction
offers reinforced, padded protection from impacts and the elements when
transporting your lights to a location shoot.
The case is designed with removable reinforced dividers, so you can
customize the case to your specic travel or storage needs. The reinforced
top features a three-sided zipper for quick and easy access to your gear. A
durable, weather-resistant nylon case protects the internal compartment
from dirt, dust, and harsh weather. Rubber feet keep the case slightly
above the ground in case of wet conditions. For security, the double zipper
enclosure includes interlocking loops for a padlock.
Please read and follow these instructions, and keep this manual in a
safe place.
Clean the unit with only a soft, dry cloth.
Make sure the item is intact, and that there are no missing parts.
Exercise caution when using this product with the maximum load
capacity.
All images are for illustrative purposes only.
1.
Unfold the shell, and place it on a
at surface.
2.
Identify the long side of each
L divider. The long side of each
L divider will form the left and
right sides of the case. Insert and
connect the L dividers into the
case.
3. Press the sides of the L dividers to
the touch-connect strips that line
the top edge of the shell.
Important! Make sure that each
side is snugly seated into the
edges and corners of the shell.
Make sure the zipper lip of the
case is above the edge of the L
dividers.
4. Insert the short dividers, and then
insert the long fabric-covered
divider.
Tip: The short dividers will help
you judge where to insert the
fabric-covered long divider. If
you dont need three separate
compartments, space the short
dividers according to your storage
needs.
5.
Insert the cushions and long
dividers.
Tip: Position the cushions with the
short side at the top and bottom,
and use the cushions as spacers
for the long dividers.
6.
Place the Timpani lights upside
down into each section. The knobs
or tilt lock handle should rest on
the cushions.
Important! Before zipping up the
case, make sure that the light xtures
are secure and that they t inside
their compartments. If one of the
xtures has too much room, reposition
the long divider to assure a snug t.
Contents Include
Nylon shell
L dividers (×2)
Short dividers (×2)
Long fabric divider
Long dividers (×2)
Cushions (×6)
Shoulder strap
Specications
Carrying/Transport Options Grab handles, strap handles, shoulder strap
Interior Dimensions (H × W × D) 16.5 × 14.5 × 15 in. (41.9 × 36.8 × 38.1 cm)
Exterior Dimensions (H × W × D) 18 × 16.5 × 15.5 in. (45.7 × 41.9 × 39.4 cm)
Interior Material Nylon, annelette
Exterior Material Nylon
Type of Closure Double interlocking zipper accepts a padlock
Load Capacity 35 lb. (15.9 kg)
Weight 8.2 lb. (3.7 kg)
2
4
5
www.luxlilight.com
One-Year Limited Warranty
This LUXLI product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period
of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with
respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product that fails during normal use
of this product in its intended manner and in its intended environment. Inoperability of the product or part(s) shall be determined by the warranty
provider. If the product has been discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance. EXCEPT
AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED
TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you with specic legal rights, and you
may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Luxli Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and
return the defective product to Luxli along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own
risk and expense.
For more information or to arrange service, visit www.luxlilight.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
LUXLI is a registered trademark of the Gradus Group.
© 2019 Gradus Group LLC. All Rights Reserved.
GG2


Product specificaties

Merk: Luxli
Categorie: Niet gecategoriseerd
Model: ORC-TIMP-3C

Heb je hulp nodig?

Als je hulp nodig hebt met Luxli ORC-TIMP-3C stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Luxli

Luxli

Luxli TSB-110 Handleiding

10 December 2024

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd