GARDE 181LETCUT1 Handleiding
GARDE
Snijmachine
181LETCUT1
Lees hieronder de 📖 handleiding in het Nederlandse voor GARDE 181LETCUT1 (4 pagina's) in de categorie Snijmachine. Deze handleiding was nuttig voor 82 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/4
USER MANUAL
1” x 1” Cut
Item #181LETCUT1
½” x ½” Cut
Item #181LETCUT12
07/2020
Lettuce Cutters
Safety Instructions
Be careful when handling and operang the machine, as the blades are very sharp. Always keep your hands
away from the blades. When not in use, use the ring pin to secure the machine in the down posion.
Operation
1) Remove ring pin from lockdown posion hole.
2) Insert ring pin into hole on handle.
3) Li and hold the handle in the upright posion and place a head of leuce on the blade surface.
4) Remove hands and ngers from the cung area.
5) Firmly push the handle down so that the push plate forces the product completely through the blades.
6) Clean the machine aer chopping is complete using the cleaning instrucons below.
7) Do not aempt to cut produce larger than the surface of the blade assembly.
Cleaning and Maintenance
1) Remove ring pin and use handle to li push plate o of the guide rods.
2) Remove hold down clips and remove the blade assembly from the frame.
3) Use a damp cloth or sponge to wipe down the frame. Clean the push plate and blade assembly
thoroughly.
4) Make sure frame, blade assembly, and all other components are dried thoroughly.
5) Replace blade assembly, and then re-aach hold down clips.
6) When necessary, lubricate guide rods with mineral oil, food grade grease, or paran. Do not use
cooking oil.
7) Replace push plate then return handle to down posion. Replace the ring pin for safe storage.
Please read and comply with the instrucons listed on this document. To get the best service life and
performance from your machine, clean it thoroughly before and aer each use by following the instrucons
listed below. Minimize the use of alkaline cleaners as they may dull the nish and cause ping.
USER MANUAL
Replacement Parts
1” x 1” Blade Assembly
#181LETBLD1
½” x ½” Blade Assembly
#181LETBLD12
Bumper
#181BUMPER2
Non-Skid Feet
#181NSKIDFEET
Bushing
#181BUSHING2
USER MANUAL
Chain and Pin Assembly
#181CHAINPIN
Product specificaties
| Merk: | GARDE |
| Categorie: | Snijmachine |
| Model: | 181LETCUT1 |
Heb je hulp nodig?
Als je hulp nodig hebt met GARDE 181LETCUT1 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Snijmachine GARDE
7 Juli 2023
2 Juli 2023
26 Juni 2023
26 Juni 2023
22 Juni 2023
22 Juni 2023
Handleiding Snijmachine
- Snijmachine Electrolux
- Snijmachine Bosch
- Snijmachine Grundig
- Snijmachine Kenwood
- Snijmachine Krups
- Snijmachine Quigg
- Snijmachine Siemens
- Snijmachine Tefal
- Snijmachine Unold
- Snijmachine Ade
- Snijmachine Ambiano
- Snijmachine Arendo
- Snijmachine Ariete
- Snijmachine Bartscher
- Snijmachine Beem
- Snijmachine Beper
- Snijmachine Berkel
- Snijmachine Bestron
- Snijmachine Bifinet
- Snijmachine Bifinett
- Snijmachine Blaupunkt
- Snijmachine Bomann
- Snijmachine Borner
- Snijmachine Brandson
- Snijmachine Brother
- Snijmachine Domo
- Snijmachine Domoclip
- Snijmachine Dremel
- Snijmachine Efbe-schott
- Snijmachine Emga
- Snijmachine Enkho
- Snijmachine Ernesto
- Snijmachine Esperanza
- Snijmachine ETA
- Snijmachine Exquisit
- Snijmachine Fagor
- Snijmachine Ferm
- Snijmachine Festool
- Snijmachine Fritel
- Snijmachine G3 Ferrari
- Snijmachine Gastroback
- Snijmachine Gastronoma
- Snijmachine Genius
- Snijmachine Gorenje
- Snijmachine Gourmetmaxx
- Snijmachine Graef
- Snijmachine Gude
- Snijmachine H.Koenig
- Snijmachine Hendi
- Snijmachine Hikoki
- Snijmachine Hyundai
- Snijmachine Ices
- Snijmachine Kalorik
- Snijmachine Kinzo
- Snijmachine Kogan
- Snijmachine Korona
- Snijmachine Livoo
- Snijmachine Mach
- Snijmachine Magic Chef
- Snijmachine Magimix
- Snijmachine Makita
- Snijmachine Melissa
- Snijmachine Mia
- Snijmachine MPM
- Snijmachine Parkside
- Snijmachine Perel
- Snijmachine Philco
- Snijmachine Powerfix
- Snijmachine Powerplus
- Snijmachine PowerTec Kitchen
- Snijmachine Presto
- Snijmachine Primo
- Snijmachine Princess
- Snijmachine ProfiCook
- Snijmachine Proline
- Snijmachine Ritter
- Snijmachine Rommelsbacher
- Snijmachine Rotel
- Snijmachine Russell Hobbs
- Snijmachine Saro
- Snijmachine Saturn
- Snijmachine Sencor
- Snijmachine Severin
- Snijmachine Silvercrest
- Snijmachine Skil
- Snijmachine Sunbeam
- Snijmachine Swan
- Snijmachine Team
- Snijmachine Thane
- Snijmachine Trebs
- Snijmachine Tristar
- Snijmachine Turmix
- Snijmachine Ufesa
- Snijmachine Venga
- Snijmachine Waves
- Snijmachine Westfalia
- Snijmachine Zelmer
- Snijmachine Jata
- Snijmachine OK
- Snijmachine Oster
- Snijmachine OXO
- Snijmachine Ozito
- Snijmachine Clas Ohlson
- Snijmachine Black And Decker
- Snijmachine Camry
- Snijmachine Clatronic
- Snijmachine Concept
- Snijmachine Cuisinart
- Snijmachine ECG
- Snijmachine Heinner
- Snijmachine Khind
- Snijmachine Orbegozo
- Snijmachine Trisa
- Snijmachine Vox
- Snijmachine Wilfa
- Snijmachine Nutrichef
- Snijmachine Hobart
- Snijmachine Nevir
- Snijmachine Eldom
- Snijmachine GOTIE
- Snijmachine JAC
- Snijmachine Coline
- Snijmachine Rösle
- Snijmachine Sammic
- Snijmachine Tescoma
- Snijmachine Maruyama
- Snijmachine Royal Catering
- Snijmachine RIDGID
- Snijmachine Riviera And Bar
- Snijmachine Ovela
- Snijmachine CaterChef
- Snijmachine Cecotec
- Snijmachine Weston
- Snijmachine RGV
- Snijmachine De Buyer
- Snijmachine Bron-Coucke
- Snijmachine FAC
- Snijmachine Avantco
- Snijmachine Makeblock
- Snijmachine Cigweld
- Snijmachine Globe
- Snijmachine Baker's Mark
- Snijmachine Wolfcraft
- Snijmachine Panduit
- Snijmachine Louis Tellier
- Snijmachine Pro-Cut
- Snijmachine Jokari
- Snijmachine Kleva
- Snijmachine Backyard Pro Butcher Series
- Snijmachine Prince Castle
- Snijmachine Boska
- Snijmachine Prowork
- Snijmachine Backyard Pro
Nieuwste handleidingen voor Snijmachine
20 November 2024
20 November 2024
19 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024
18 November 2024