Frequency Central High Towers Handleiding

Frequency Central Niet gecategoriseerd High Towers

Lees hieronder de 📖 handleiding in het Nederlandse voor Frequency Central High Towers (5 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 46 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF

Pagina 1/5

Frequency central

Build documentation for:

High towers

Featuring code by Jetroid

Main PCB Control PCB

High Towers is a 4 channel programmable and addressable clock divider. It is more than the

sum of it’s parts.

High Towers internal operations can be considered as 4 clock dividers slaved to an incoming

clock. The 4 clock dividers are labelled A, B, C, and D, the divisions for each divider may be

selected using the presets and the individual division selectors. The clock dividers can be set

to count up, down, or to one of a variety of modes that move between counting up and

down. Furthermore, the division of each clock can be set by external CV.

For further information see the High Towers User Guide.

Key to PCB screen print:

n: This signifies NPN BC547 transistors. Note the correct pinout as shown by the half circles.

Please observe the correct polarity for all ICs, voltage regulators, diodes and electrolytic

capacitors.

Bill of Materials

You will notice that all of the components listed below are also hyperlinks to where I buy

each specific part from. You can also use the hyperlinks to find out more about what each

component looks like. If you want to know even more, is your friend. Google

1K x 25

10K x 7

All resistors ¼ watt

metal film.

100nF 1 x

10uF x 1

47uF x 2

TOOL PIC

TL084 x 1

TL072 x 1

BC547 x 6

1N4148 x 6

78L05 x 1

3mm red LED x 6

14 pin IC socket x 2

8 pin IC socket x 1

B100K x 2 metal

shaft

B100K x 4

(or these)*

plastic shaft

3.5mm socket x 1 2

Tactile switch x 2

Male header x 1

(cut to size)

Female header x 1

(cut to size)

Power header x 1

Knobs x 2

* I prefer the Song Huei tall trimmers because they have a longer shaft and a white notch.

Main PCB assembly

1. Solder the diode and all resistors

2. Solder all three IC sockets

3. Solder the non elecrolytic capacitors

4. Solder the 78L05 and BC547s watch the polarities! –

5. Solder the box power header. Make sure the notch lines up with the screenprint

legend. If in doubt, have a look at a power cable, and make sure when inserted into

the header the red stripe lines up with the -12V screenprint.

6. Solder all electrolytic capacitors

7. Cut male headers to size and solder them into place. Make sure that they stick out of

the bottom of the PCB.

Product specificaties

Merk:	Frequency Central
Categorie:	Niet gecategoriseerd
Model:	High Towers

Heb je hulp nodig?

Als je hulp nodig hebt met Frequency Central High Towers stel dan hieronder een vraag en andere gebruikers zullen je antwoorden

Uw naam*

Jouw email*

Schrijf hier uw vraag

Handleiding Niet gecategoriseerd Frequency Central

Frequency Central High Towers Handleiding

11 September 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024

Kramer K-Bar Camera Bracket Handleiding

26 November 2024

Kramer RK-19 Handleiding

26 November 2024

Kramer OSP-MM1 Handleiding

26 November 2024

Kramer ASPEN-1616UX Handleiding

26 November 2024

Korg Pitchstrap Handleiding

26 November 2024

NeoMounts WL70-450BL11 Handleiding

26 November 2024

Kramer CLS-AOCH/60 Handleiding

26 November 2024

Klauke EKM 6022ISM Handleiding

26 November 2024