EluneVision Titan Handleiding
EluneVision
Projectiescherm
Titan
Lees hieronder de 📖 handleiding in het Nederlandse voor EluneVision Titan (6 pagina's) in de categorie Projectiescherm. Deze handleiding was nuttig voor 80 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld
Pagina 1/6
To the Owner
Thank you for purchasing our Titan Tab Tension screens, using our excellent screen
materials and design, to give you years of trouble free enjoyment. Please take a
moment to read the user manual before installation to avoid any potential issues.
1. When assembling, do not stand right under the screen. Expansive bolts should
be îš¿rmly punched and îš¿xed into the wall or ceiling.
2. Have two people present when installing the screen
3. Be sure the ground wire is connected with power cable to avoid electric shock
4. Keep screen fabric away from the high temperatures to avoid permanent mate-
rial deformation.
Safety Guide
Titan Tab Tension Schematic
18
27
Exploded View
6 3
1. Unpack the screen carefully, check if the screen is in good condition
2. Be sure the ground wire is connected with power cable to avoid electric shock
3. Find the wall or ceiling placement for the screen mounts, make sure everything is
level
4. Attach the screen mounts to the wall or ceiling, then mate the mount into the
screen railing to lock the screen into place
5. Refer to the diagrams below for more details
Installation
Installation Notes
1. Install the screen away from direct sunlight, keep screen material exposure to
UV to a minimum
2. Install in a room without excess humidity
3. Keep screen away from devices (heaters, etc.) that cause large changes in tem-
perature and humidity
4. Handle screen with care, avoid vibrations and drops
Screen mount Screen mount mated to screen rail
Operating Notes
1. Do not run the screen continuously for more than 5 minutes, the motor will
shut down after more than îš¿ve minutes of continous use to prevent overheat-
ing
2. Unplug the screen when screen is not to be used for an extended period
3. Check and replace battery if remote stop working
4. -Do not pull on control wire to support to prevent screen malfunction and elec
tric shock
5. Never disassemble the limit switch
Control Panel
1. The upright position for the control wall panel is shown in the picture. The cable
should come out from the bottom of the control wall panel.
2. The button closest to the IR sensor is the up button.
3. The second button from the top is the stop button.
4. The last button from the top is the down button
IR Sensor
Product specificaties
| Merk: | EluneVision |
| Categorie: | Projectiescherm |
| Model: | Titan |
Heb je hulp nodig?
Als je hulp nodig hebt met EluneVision Titan stel dan hieronder een vraag en andere gebruikers zullen je antwoorden
Handleiding Projectiescherm EluneVision
3 Juli 2023
3 Juli 2023
17 Juni 2023
7 Juni 2023
4 Juni 2023
1 Juni 2023
31 Mei 2023
Handleiding Projectiescherm
- Projectiescherm Duronic
- Projectiescherm Elite
- Projectiescherm GPX
- Projectiescherm Kodak
- Projectiescherm Nec
- Projectiescherm Pyle
- Projectiescherm Vestel
- Projectiescherm Optoma
- Projectiescherm Oregon Scientific
- Projectiescherm Luxburg
- Projectiescherm Draper
- Projectiescherm Da-Lite
- Projectiescherm AV:link
- Projectiescherm Projecta
- Projectiescherm Elite Screens
- Projectiescherm Celexon
- Projectiescherm Lumene
- Projectiescherm Stewart
- Projectiescherm Avers
- Projectiescherm Instaal
- Projectiescherm Elite ProAV
- Projectiescherm KHOMO GEAR
- Projectiescherm EPV
Nieuwste handleidingen voor Projectiescherm
18 Augustus 2024
18 Augustus 2024
7 Augustus 2024
20 Juni 2024
20 Juni 2024
4 Mei 2024
4 Mei 2024
4 Mei 2024