Chicco KeyFit 35 SoftGoods Removal Handleiding

Chicco Niet gecategoriseerd KeyFit 35 SoftGoods Removal

Lees hieronder de 📖 handleiding in het Nederlandse voor Chicco KeyFit 35 SoftGoods Removal (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 60 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/3
WARNING: Avoid serious injury or death to your child. Never
use your KeyFit 35 Child Restraint without the softgoods in place.
You must read and understand the Softgood Removal instructions
and the instructions in the User Guide. If you do not understand
these instructions, DO NOT attempt to remove the softgoods,
STOP and call Chicco at 1-877-424-4226.
INSTRUCTIONS: KeyFit 35 Softgood Removal
IMPORTANT: Please also refer to the instructions that came with your product.
Rotate the Carry Handle up into the carry position. To remove the Canopy, unhook the Elastic Straps on both sides,
below the Carry Handle hub. Undo both Toggles on the back of the Child Restraint. On one side of the Canopy, press the
button on the Canopy Mount and pull out the bow. Repeat for the other side of the Canopy and remove. Then rotate the
Carry Handle back into stationary position.
Refer to User Guide if needed.
1
Press the Harness Adjuster Button and loosen the
Harness Straps. Undo the buckle and chest clips.
2
Remove the optional Head Rest Insert and Newborn
Positioner.
Refer to User Guide if needed.
4
Remove the Crotch Strap Pad by pushing the fabric Tab
through the slot on the BACK of the Harness Buckle. Then
pull Tab out of the FRONT and remove Crotch Strap Pad.
IMPORTANT! If Crotch Strap Pad prevents harness from properly
fitting small Infant, it should be removed.
3
1
SS0030E_01
Remove both Shoulder Pads.
Undo the hook and loop
sections located on the outside seam of the Shoulder Pad.
5
2
At the top and side of the Carrier, flip the plastic tabs
out from under the lip of the Carrier. Pull the fabric from
the top and sides of the Carrier.
9
Pull forward on the Seat Back fabric and guide the Head Rest through the opening on the Seat Back. Pinch the Seat
Pad fabric at the corner of the Harness Adjuster Strap Cover. Pull forward on the Seat Pad edge to remove the fabric from
around the Harness Adjuster Strap Cover.
Note: The plastic Harness Adjuster Strap Cover is NOT removable.
WARNING - NEVER use Child Restraint without the seat pad.
10
Flip the Carrier over
and adjust Head Rest
into the
lowest position, using the Height Adjuster Plate.
6
Remove BOTH Shoulder Harness Straps from the
Splitter Plate. Then flip the Carrier upright and pull the
Shoulder Harness Straps to front of Carrier.
7
Remove the Seat Pad from the carrier.
12
Slide the fabric over both seat belt guides.
Feed
the harness straps, chest clip sections, and crotch buckle
through the fabric openings.
11
Place the Carrier on its side and unhook the Elastic
Straps, located just below the Handle’s rotating hinge.
Then flip out the Plastic Tabs located below the seat belt
guide. Repeat for the other side
8
Height Adjuster
Plate
Adjustment
Positions
4
Make sure the Head Rest is in the lowest position. Buckle the crotch strap buckles and chest clip. Lay the Harness
Straps over the seat back to make sure the Harness Straps are NOT twisted and oriented as shown. Thread Harness Strap
ends into the openings on the Height Adjuster Plate.
22
Flip the Carrier over and pull the harness straps through the openings. Attach BOTH Harness Straps to the
Splitter Plate. Check to make sure the straps are above the Height Adjuster Plate.
WARNING - Make sure Harness Straps
are not twisted and both Harness Straps are securely attached to splitter plate.
23
Attach the Crotch Strap Pad by pushing the fabric Tab
through the slot on the FRONT of the Harness Buckle. Then
pull Tab out of the BACK and attach Crotch Strap Pad.
IMPORTANT! If Crotch Strap Pad prevents harness from properly
fitting small Infant, it should be removed.
25
Flip the Carrier to the front and undo the buckle and
chest clip to attach the optional Newborn Positioner
and Head Rest Insert.
Refer to User Guide if needed.
24
Place the carrier on its side and fold the side plastic
tab under the edge of the Carrier shell. Locate and attach
the elastic strap to the hook, as shown. Tuck the material
with the elastic strap under the bottom of the handle.
Repeat for the other side.
21
On the top of the Carrier, flip the plastic tab and tuck it
under the edge of the Carrier frame.
20

Product specificaties

Merk: Chicco
Categorie: Niet gecategoriseerd
Model: KeyFit 35 SoftGoods Removal

Heb je hulp nodig?

Als je hulp nodig hebt met Chicco KeyFit 35 SoftGoods Removal stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Niet gecategoriseerd Chicco

Chicco

Chicco Bento Handleiding

17 Mei 2024
Chicco

Chicco Fit360 Car Seat Mirror Handleiding

18 Maart 2024
Chicco

Chicco Zest Handleiding

21 Februari 2024
Chicco

Chicco Corso Flex Handleiding

21 Februari 2024
Chicco

Chicco LullaGlide Handleiding

19 Juli 2023
Chicco

Chicco Stack Hi-Lo Handleiding

19 Juli 2023
Chicco

Chicco SnugSupport Handleiding

23 Juni 2023
Chicco

Chicco KidFit Plus Handleiding

23 Juni 2023
Chicco

Chicco Dash Play Panel Handleiding

17 Mei 2023
Chicco

Chicco KeyFit 30 Handleiding

17 Mei 2023

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd

Taga Harmony

Taga Harmony TOS-600 v.2 Handleiding

26 November 2024
Trace Elliot

Trace Elliot Pro 2x12 Cabinet Handleiding

26 November 2024
Kramer

Kramer K-Bar Camera Bracket Handleiding

26 November 2024
Kramer

Kramer RK-19 Handleiding

26 November 2024
Kramer

Kramer OSP-MM1 Handleiding

26 November 2024
Kramer

Kramer ASPEN-1616UX Handleiding

26 November 2024
Korg

Korg Pitchstrap Handleiding

26 November 2024
NeoMounts

NeoMounts WL70-450BL11 Handleiding

26 November 2024
Kramer

Kramer CLS-AOCH/60 Handleiding

26 November 2024
Klauke

Klauke EKM 6022ISM Handleiding

26 November 2024