Aquatic AV AQ-RFDM-4F Handleiding

Aquatic AV Controller AQ-RFDM-4F

Lees hieronder de πŸ“– handleiding in het Nederlandse voor Aquatic AV AQ-RFDM-4F (1 pagina's) in de categorie Controller. Deze handleiding was nuttig voor 18 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/1
Mounting Instructions for Flush Mount, Fixed Waterproof Remotes
AQ-WR-4F / AQ-RFDM-4F
Aquatic AV recommends the β€œmeasure twice, cut once” method!
1. Measure and trace the required mounting hole (52.5 mm diameter) in the desired location.
2. Use a Hole Saw to cut out the hole.
3. Make sure the remote ts snuggly into the hole before proceeding any further.
4. For AQ-WR-4F model - install the required length of Aquatic AV extension cable* from the source unit to the remote
mounting position, making sure the cable is not stretched or compromised at any point.
5. Insert and secure the two mounting screws into the rear of the remote control (see β€˜A’ below).
6. Attach the U-shaped bracket (see β€˜B’ below) over the two mounting screws and secure the into the desired location, making
sure to leave enough clearance to secure the mounting screws tightly.
Note: the U-shaped bracket can be shortened to achieve the ideal mounting on surfaces of different thickness/depth.
A
B
*AQ-WR-4F model only will require an extension cable (sold seperately):
AQ-EXT-3 (3ft length), AQ-EXT-12 (12ft), AQ-EXT-24 (24ft)


Product specificaties

Merk: Aquatic AV
Categorie: Controller
Model: AQ-RFDM-4F

Heb je hulp nodig?

Als je hulp nodig hebt met Aquatic AV AQ-RFDM-4F stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Controller Aquatic AV

Handleiding Controller

Nieuwste handleidingen voor Controller