Anker Life P2 Handleiding

Anker Oordopje Life P2

Lees hieronder de 📖 handleiding in het Nederlandse voor Anker Life P2 (66 pagina's) in de categorie Oordopje. Deze handleiding was nuttig voor 108 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Download PDF
Pagina 1/66
USER MANUAL
Soundcore Life P2
English 01 Português 66
Čeština 06 Pусский 71
Dansk Slovenský Jazyk11 76
Deutsch Slovenski Jezik17 81
ελληνικά 21 86Svenska
Español Türkçe26 91
Suomi 31 日本語 96
Français 36 한국어 101
Magyar 41 简体中文 106
Italiano 10 繁體中文 111
Nederlands 51 Portugues do Brasil 116
Norsk 56 ةيِبَرَعلا 121
Język polski 61 ברִית 126
01 EN EN 02
Charging
• Remove the protective lm from the earbuds when using for the rst time.
• Fully charge both the earbuds and the charging case before the rst-time using.
• To prevent damage, use the provided USB-C cable.
• Fully dry off the earbuds and the USB port before charging.
1
RR
2
LED behaviour (Earbuds & Charging case)
Steady white Being Charging
Light off • Fully charged
• Remaining battery >10% (when in use)
Powering On/Off
The earbuds will automatically power on when taken out of the charging case and power off
when placed back into the charging case.
ON OFF
LED behaviour (Earbuds)
ON Steady white for 1 second
OFF Steady red for 1 second
• To manually power on, press the multi-function button on either one of the earbuds.
• To manually power off, press and hold the multi-function button on either one of the
earbuds for 3 seconds.
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the
charging case.
LED behaviour (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case,
you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, 3 to 5
seconds later, the microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-out screen.
03 EN EN 04
Soundcore
Life P2
B tlue ooth Pairing Reque st
“Headset” wo l uld ike
to pair w h youit r iPhone
C el anc Pair
Pair
LED behaviour (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
In the pairing process, some devices are incompatible with Qualcomm True Wireless Primary-
Secondary dual pairing names, it may notice “connection unsuccessful” when you tap “Pair”
or even no screen popped out. Don’t worry and it will not inuence the using.
Once successfully paired, the primary earbud connects with your device and transfers signal
to the secondary earbud, the latter one will not connect with your device. As a result, in the
Bluetooth pairing list on your device, it may indicate that only one side is connected while the
other side is not.
• To pair with another Bluetooth device, turn off Bluetooth on the currently connected
device rst.
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
Wearing
1. Choose the ear tips that t your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.
Controls
Play / Pause
1
R\L
Press (R/L)
Next track
R
2
Press twice (R)
Previous track
2
L
Press twice (L)
Volume up / down Control volume via the connected device
Answer / End a call
1
R\L
Press (R/L)
Reject a call
1”
R\L
Press and hold for 1 second (R/L)
Enable mono mode Remove either one of the earbuds off your ear and press and hold
the button on the other earbud for 1 second
Activate Siri or other voice
assistant software
1”
R\L
Voice Assistant Press and hold for 1 second (R/L)
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect
with your device properly.
1. Place the earbuds into the charging case and make sure they are being charged.
2. Press and hold the button on both earbuds for 3 seconds until the LED indicators ash red 3
times and then turn white.
All the memory data will be cleared.

Product specificaties

Merk: Anker
Categorie: Oordopje
Model: Life P2

Heb je hulp nodig?

Als je hulp nodig hebt met Anker Life P2 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden


Handleiding Oordopje Anker

Anker

Anker SoundBuds Slim Handleiding

2 Mei 2023
Anker

Anker Life P2 Handleiding

13 Januari 2023

Handleiding Oordopje

Nieuwste handleidingen voor Oordopje

Akai

Akai BTE-J10 Handleiding

3 Januari 2025
Philips

Philips TAT2149 Handleiding

2 Januari 2025
Akai

Akai BTE-W200F Handleiding

1 Januari 2025
Akai

Akai BTE-W300ENC Handleiding

1 Januari 2025
Akai

Akai BTE-J20ANC Handleiding

1 Januari 2025
Audio-Technica

Audio-Technica ATH-CKS330NC Handleiding

27 December 2024
Sencor

Sencor SEP GRIM Handleiding

24 December 2024
Adam

Adam S6X Handleiding

23 December 2024
Cellular Line

Cellular Line Roller Clip Classic Handleiding

18 December 2024
JVC

JVC HA-C300 Handleiding

14 December 2024