Sencor SCA SH1001 Handleiding


Bekijk gratis de handleiding van Sencor SCA SH1001 (1 pagina’s), behorend tot de categorie Niet gecategoriseerd. Deze gids werd als nuttig beoordeeld door 51 mensen en kreeg gemiddeld 4.7 sterren uit 26 reviews. Heb je een vraag over Sencor SCA SH1001 of wil je andere gebruikers van dit product iets vragen? Stel een vraag

Pagina 1/1
SCA SH1001 Car seat heater SENCOR ®
Warning!
Do not use the seat heater when:
- It is obviously damaged;
- outdoor;
- it is wet;
- the power cord or plug are damaged;
- it is broken;
- you use pacemaker or similar appliances;
- you are pregnant.
No part of the seat heat may cover the airbag outlet of the seat armrest.
Protect against moisture, dripping or pouring water .
Do not use the seat heater near the open re, do not place an open re, such as a candle, on the seat heater.
Do not leave the seat heater plugged in the car unaended, it can discharge the baery or risk of overheang.
Do not fold the seat heater when plugged in!
Do not use the seat heater for any other purposes than the intended usage.
Cleaning and maintenance
The seat heater does not use any special maintenance. Use only a so, slight wet cloth or sponge to clean the surface Do not use any .
abrasive agents or chemical solvents (paint and varnish thinner, etc.) as such substances may damage the heater fabrics.
Never wash the seat heater in the dishwasher !
Do not clean the seat heater under the running water.
Usage
1. Take the seat heater out of the protecve cover. This dispose upon the local direcve rules.
2. Install the seat heater on the car seat. Ensure the installaon stripes are safely secured.
3. Plug into the cigaree lighter 12V .
4. Switch to HI posion for high power or posion for lower power. To turn o, switch to OFF posion. LO
Technical specicaons
Power consumption: 48 W (HI), 36 W (LO)
Draws: 3-4 A
Fuse: 10 A
This appliance complies with EU rules and regulaons regarding electromagnec and electrical safety.
The meaning of the symbol on the product, its accessory or packaging indicates that this product shall not be treated as
household waste. Please, dispose of this product at your applicable collecon point for the recycling of electrical & electronic
equipment waste.
Changes to the text, design and technical specicaons may occur without prior noce and we reserve the right to make these changes.
Manufacturer address: FAST ČR, a.s., Černokostelecká 1621, 251 01 Říčany. The original version is in Czech.


Product specificaties

Merk: Sencor
Categorie: Niet gecategoriseerd
Model: SCA SH1001

Heb je hulp nodig?

Als je hulp nodig hebt met Sencor SCA SH1001 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden