Netgear ProSafe GS104 Handleiding


Lees hieronder de đź“– handleiding in het Nederlandse voor Netgear ProSafe GS104 (8 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 15 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/8
10/100/1000 Mbps Gigabit Ethernet GS104
4-Port Switch
Installation Guide
4500 Great America Parkway
Santa Clara, CA 95054
USA
Phone: 1-888-NETGEAR
E-mail: support@NETGEAR.com
www.NETGEAR.com
Technical Support
YOU MUST REGISTER TO OBTAIN TECHNICAL SUPPORT. PLEASE RETAIN
PROOF OF PURCHASE and the warranty information.
To register your product, get product support or obtain product information and product
documentation, go to http://www.NETGEAR.com/register.
You’ll find technical support information at: http://www.NETGEAR.com/ through the cus-
tomer service area. If you want to contact technical support by telephone, see the support
information card for the correct telephone number for your country.
NETGEAR, Inc.
© 2002 by NETGEAR, Inc. All rights reserved.
NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. in the United States
and/or other countries.
Other brand and product names are trademarks or registered trademarks of their respective holders.
Information is subject to change without notice.
Introduction
The NETGEAR® 4-Port Gigabit Ethernet Switch Model GS104 provides you with a low-cost,
reliable, high-performance switch to connect up to four different Ethernet-enabled devices (such as
computers, file servers and routers) at blazing Gigabit Ethenet speeds.
The GS104 Gigabit Ethernet Switch enables you to build a small network that gives you 10,
100, or 1000 Mbps access to other devices on the network. It provides a full, dedicated 1000
(or 100, or 10 Mbps) connection between two devices. If a device has full-duplex capability,
the GS104 switch provides a 2000 Mbps (or 200, or 20 Mbps) connection. This means the
GS104 can instantly move even very large files across your network. As an added benefit, this
switch works with both Windows and Macintosh computers.
Ethernet cables come as either straight-through or crossover cables—depending on whether
you’re connecting to a device (computer, server, or printer) or networking equipment (hub,
switch, or router). With the Auto Uplink™ feature, you don’t have to worry about which one
you use. Each port on the GS104 switch automatically configures itself correctly when you
plug in a device’s cable.
If you have a problem with your switch, NETGEAR offers free support 24 hours a day and 7
days a week on the Web (www.NETGEAR.com), by e-mail (support@NETGEAR.com) and by
phone (see the provided support information card for phone numbers).
Installation Overview
Estimated Time: 5–10 minutes
1. Unpack the box and verify the contents.
2. Prepare to install the switch.
3. Install the switch and connect the other devices.
Model GS104 4-Port 10/100/1000 Mbps Gigabit Ethernet Switch


Product specificaties

Merk: Netgear
Categorie: Niet gecategoriseerd
Model: ProSafe GS104

Heb je hulp nodig?

Als je hulp nodig hebt met Netgear ProSafe GS104 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd Netgear

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd