NAV-TV RGB2+ NTV-KIT038 Handleiding

NAV-TV Niet gecategoriseerd RGB2+ NTV-KIT038

Lees hieronder de đź“– handleiding in het Nederlandse voor NAV-TV RGB2+ NTV-KIT038 (3 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 23 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/3
Illustration A
3)Blue wire: Positive+
trigger for Video Input 1
4)White wire: Positive+
trigger for Video Input 2*
2)Black w
gro
1)Red
Acces
*Video 2 only applies for RGB2+
Illustration B
DB9 connector for Video In/Out
Wires
Brig
RGBs(4-wire
selector (keep th
Attached toggle switch to toggle from Nav. /
Video Input 1. Do Not Apply Power To
These Wires!
RGB2/RGB2+ INSTRUCTIONS
Yellow Wire
Green Wire
Orange Wire
Brown Wire
Dark Gray Heatshrink
Input (Nav. Computer) Output (
Red Video
Green Video
Blue Video
Sync
*Shield
Red
Blue
Purp
*Dark Gray Heatshrink
*Blac
*Do not mistake the dull gray heatsh
shiny black sync output wi
DB9 Connector
Questions? Need vehicle-specific wiring information? Tech sup
1-866-477-3336
Video Input 1
Video In / Out Connections
There are 4 video wires, called RGBS wires on almost every factory navigation screen – R
Green video, Blue video . and Sync) The fifth wire that is neede
shield.
Use a light bulb-type test light and test the wires behind
that will change the colors on the screen while you probe them.
wire that will make the screen scroll or shift is the Sync wire.
Check to see if you have a wire that turns the screen yellow. If you
On Screen (while probing w/ t.light) Back-Up Cam Interf
Cyan (Aqua) Red video wire
Magenta (Purple / Redish) Green video wire
Yellow Blue video wire
Scrolling or Shifting Sync wire
Shield Shield
If you test the wires between the navigation computer an
appear on the screen, wire it as follows:
On Screen Back-Up Cam Inter
Red Red video wire
Green Green video wire
Blue Blue video wire
Scrolling or Shifting Sync video wire
Shield Shield
After you’ve found all R, G, B and Sync wires, cut them. Conn
wires to the Output ,wires Red, Blue, Purple and Black. Connect
wires to the Input wires, Yellow, Green, Orange and Brown.
If you find that you’ve connected all the wires properly and
two sync wires. If you find two wires that make the screen scroll, i
The necessary process for wiring an Interface with a vehicle that h
One wire might make the screen scroll vertically after pr
Another wire might make the screen scroll horizontally after pro
First, connect Sync 1. If the video scrolls, then jump Sync 2 to
through a resistor. You will have to find the resistance value tha
ohms and work your way up to around 100 ohms. Sometimes
navigation side of Sync 2 usually doesn’t need to be connected.
but rolling in normal navigation mode, then you will need to us
Once activated, the relay will cut sync 2 and connect it to sync 1 w
If you’re using multiple monitors or displays, you will nee
Interface needs a direct video input.
Power / Ground wire
When making power connections, tap into heavy gauge wires. It
harness whenever having difficulty finding good power sources. S


Product specificaties

Merk: NAV-TV
Categorie: Niet gecategoriseerd
Model: RGB2+ NTV-KIT038

Heb je hulp nodig?

Als je hulp nodig hebt met NAV-TV RGB2+ NTV-KIT038 stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd NAV-TV

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd