HJH Office Prado kunstleder Handleiding

HJH Office Bureaustoel Prado kunstleder

Lees hieronder de 📖 handleiding in het Nederlandse voor HJH Office Prado kunstleder (2 pagina's) in de categorie Bureaustoel. Deze handleiding was nuttig voor 21 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/2
Aufbau
1 Befestigen Sie die Mechanik am Sitzteil.
2 Befestigen Sie die Rückenlehne am Sitzteil.
3 Befestigen Sie die Armlehnen am Sitzteil
4 Stecken Sie die Gasfeder mittig in das
Fußkreuz. Entfernen Sie (falls vorhanden)
vor dem Einbau die Schutzkappe vom Aus-
lösepin der Gasfeder. Diese lässt sich leicht
entfernen.
5 Setzen Sie anschließend das Sitzteil auf die
Gasdruckfeder.
6 Setzen Sie sich nun mehrmals auf den Stuhl,
damit die Verbindung zwischen Sitz, Gas-
feder und Fuß gefestigt wird. Anschließend
können Sie die Gasfeder bedienen und die
Stuhlhöhe individuell einstellen.
Assembly
1 Mount the mechanism onto the seat.
2 Mount the back rest onto the seat.
3 Mount the arm rests onto the seat.
4 Insert the ve castors into designated holes
at the bottom of the 5-star base. Insert the
gaslift into the center of the base. If present,
remove the plastic protective cap from the
gas lift.
5 Place the seat onto the gaslift.
6 Repeatedly sit onto the chair, so that the
connections between the seat, gaslift and
foot tighten. Now you can adjust the chair to
your individual needs. PRADO
Aufbauanleitung
Assembly instructions
Hinweis / Remark
Packen Sie zunächst alle Teile der Lieferung aus und prüfen Sie diese auf eventuelle Transportschäden. Um einen leichten Aufbau zu
gewährleisten, empfehlen wir alle Schrauben nur leicht anzuziehen. Erst nachdem alle Schrauben in das jeweilige Gewinde eingeführt
wurden sollten diese fest angezogen werden.
At rst please take all parts out of the box and inspect them for possible transport loss/damage. In order to guarantee easy setup we
recommend that you initially tigthen the screws just enough to hold, then tighten them rmly when all screws are in place.
Darstellung kann von tatsächlicher Ausführung abweichen.
Illustration may vary from the actual product.
Siehe Rückseite für weitere Informationen.
See the back of this sheet for further information.
Entfernen Sie vor dem Einbau die
Schutzkappe vom Auslösepin der
Gasfeder (falls vorhanden). Diese lässt
sich leicht entfernen.
If present, remove the plastic protecti-
ve cap from the gas lift.


Product specificaties

Merk: HJH Office
Categorie: Bureaustoel
Model: Prado kunstleder

Heb je hulp nodig?

Als je hulp nodig hebt met HJH Office Prado kunstleder stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Bureaustoel HJH Office

Handleiding Bureaustoel

Nieuwste handleidingen voor Bureaustoel