ART Dualxdirect Handleiding


Lees hieronder de 📖 handleiding in het Nederlandse voor ART Dualxdirect (12 pagina's) in de categorie Niet gecategoriseerd. Deze handleiding was nuttig voor 36 personen en werd door 2 gebruikers gemiddeld met 4.5 sterren beoordeeld

Pagina 1/12
Artcessories
User's Manual
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears,
alerts you to the presence of
uninsulated dangerous voltage
inside enclosure-voltage that may be
sufficient to constitute risk of shock.
This symbol, whenever it appears,
alerts you to important operating
and maintenance instructions in
the accompanying literature.
Please read the manual.
Read Instructions: Retain safety and operating instructions for
future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user
guide.
Do not open: There are no user serviceable parts inside. Refer
any service work to qualified technical personnel only.
Grounding: Only connect the unit to equipment with properly
grounded mains power. Do not defeat the grounding and
polarization means of the power cord plug of the connected
equipment. Do not remove or tamper with the ground
connection on the power cord of the connected equipment.
Environment: Protect from excessive dirt, dust, heat, and
vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke
machines.
Handling: Protect the controls from damage during transit. Use
adequate padding if you need to ship the unit. To avoid injury to
yourself or damage to the equipment, take care when lifting,
moving or carrying the unit.
Servicing: Refer servicing to qualified technical personnel.
Installation: Install the unit in accordance with the instructions
printed in the user guide.
INTRODUCTION:
Thanks for purchasing Applied Research and
Technology’s DUALXDirect. The DUALXDirect provides
two independent high quality active interfaces that let
you connect instrument, line, or speaker level signals to
a mixer or other balanced inputs. Each of the high
impedance 1/4-inch and XLR inputs (provided via
"combo" jacks) are buffered and converted by very low
noise active electronics into an isolated, balanced, low
impedance signal output. The DUALXDirect has an
extremely flat and wide frequency response and can
handle high signal levels. This gives the DUALXDirect a
very clean and neutral sound with a wide variety of
signal sources and over long signal runs in high noise
environments.
The input ATTENUATOR switches allow for a wide
range of signal levels and the input THRU jacks allow
for tapping off of your signal chain. The GROUND LIFT
switches let you totally separate the input and output
signal grounds, when appropriate, to isolate two
systems, thereby reducing hum and ground-loop noise.
The DUALXDirect's active circuitry is powered by
phantom voltage from the OUTPUT connections or by
an internal 9V battery, when external power is not
available. When powered by a battery, it draws less than
7.5 mA which should provide more than 100 hours of
operation with a new battery (alkaline recommended). If
phantom power is available, then the DUALXDirect will
automatically draw its power from the external source.
The POWER ON/OFF switch lights more dimly when the


Product specificaties

Merk: ART
Categorie: Niet gecategoriseerd
Model: Dualxdirect

Heb je hulp nodig?

Als je hulp nodig hebt met ART Dualxdirect stel dan hieronder een vraag en andere gebruikers zullen je antwoorden




Handleiding Niet gecategoriseerd ART

Handleiding Niet gecategoriseerd

Nieuwste handleidingen voor Niet gecategoriseerd